Skip to content

Troubleshooting

Scan

Timeout

Error

$ trivy image ...
...
analyze error: timeout: context deadline exceeded

Your scan may time out. Java takes a particularly long time to scan. Try increasing the value of the ---timeout option such as --timeout 15m.

Unable to initialize an image scanner

Error

$ trivy image ...
...
2024-01-19T08:15:33.288Z    FATAL   image scan error: scan error: unable to initialize a scanner: unable to initialize an image scanner: 4 errors occurred:
* docker error: unable to inspect the image (ContainerImageName): Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?
* containerd error: containerd socket not found: /run/containerd/containerd.sock
* podman error: unable to initialize Podman client: no podman socket found: stat podman/podman.sock: no such file or directory
* remote error: GET https://index.docker.io/v2/ContainerImageName: MANIFEST_UNKNOWN: manifest unknown; unknown tag=0.1

It means Trivy is unable to find the container image in the following places:

  • Docker Engine
  • containerd
  • Podman
  • A remote registry

Please see error messages for details of each error.

Common mistakes include the following, depending on where you are pulling images from:

Common

  • Typos in the image name
    • Common mistake :)
  • Forgetting to specify the registry
    • By default, it is considered to be Docker Hub ( index.docker.io ).

Docker Engine

  • Incorrect Docker host
    • If the Docker daemon's socket path is not /var/run/docker.sock, you need to specify the --docker-host flag or the DOCKER_HOST environment variable. The same applies when using TCP; you must specify the correct host address.

containerd

  • Incorrect containerd address
    • If you are using a non-default path, you need to specify the CONTAINERD_ADDRESS environment variable. Please refer to this documentation.
  • Incorrect namespace
    • If you are using a non-default namespace, you need to specify the CONTAINERD_NAMESPACE environment variable. Please refer to this documentation.

Podman

  • Podman socket configuration

Container Registry

  • Unauthenticated
    • If you are using a private container registry, you need to authenticate. Please refer to this documentation.
  • Using a proxy
    • If you are using a proxy within your network, you need to correctly set the HTTP_PROXY, HTTPS_PROXY, etc., environment variables.
  • Use of a self-signed certificate in the registry
    • Because certificate verification will fail, you need to either trust that certificate or use the --insecure flag (not recommended in production).

Certification

Error

Error: x509: certificate signed by unknown authority

TRIVY_INSECURE can be used to allow insecure connections to a container registry when using SSL.

$ TRIVY_INSECURE=true trivy image [YOUR_IMAGE]

GitHub Rate limiting

Error

$ trivy image ...
...
API rate limit exceeded for xxx.xxx.xxx.xxx.

Specify GITHUB_TOKEN for authentication https://developer.github.com/v3/#rate-limiting

$ GITHUB_TOKEN=XXXXXXXXXX trivy alpine:3.10

Unable to open JAR files

Error

$ trivy image ...
...
failed to analyze file: failed to analyze usr/lib/jvm/java-1.8-openjdk/lib/tools.jar: unable to open usr/lib/jvm/java-1.8-openjdk/lib/tools.jar: failed to open: unable to read the file: stream error: stream ID 9; PROTOCOL_ERROR; received from peer

Currently, we're investigating this issue. As a temporary mitigation, you may be able to avoid this issue by downloading the Java DB in advance.

$ trivy image --download-java-db-only
2023-02-01T16:57:04.322+0900    INFO    Downloading the Java DB...
$ trivy image [YOUR_JAVA_IMAGE]

Running in parallel takes same time as series run

When running trivy on multiple images simultaneously, it will take same time as running trivy in series. This is because of a limitation of boltdb.

Bolt obtains a file lock on the data file so multiple processes cannot open the same database at the same time. Opening an already open Bolt database will cause it to hang until the other process closes it.

Reference : boltdb: Opening a database.

Multiple Trivy servers

Error

$ trivy image --server http://xxx.com:xxxx test-image
...
- twirp error internal: failed scan, test-image: failed to apply layers: layer cache missing: sha256:*****

To run multiple Trivy servers, you need to use Redis as the cache backend so that those servers can share the cache. Follow this instruction to do so.

Problems with /tmp on remote Git repository scans

Error

FATAL repository scan error: scan error: unable to initialize a scanner: unable to initialize a filesystem scanner: git clone error: write /tmp/fanal-remote...

Trivy clones remote Git repositories under the /tmp directory before scanning them. If /tmp doesn't work for you, you can change it by setting the TMPDIR environment variable.

Try:

$ TMPDIR=/my/custom/path trivy repo ...

Running out of space during image scans

Error

image scan failed:
failed to copy the image:
write /tmp/fanal-3323732142: no space left on device

Trivy uses a temporary directory during image scans. The directory path would be determined as follows:

  • On Unix systems: Use $TMPDIR if non-empty, else /tmp.
  • On Windows: Uses GetTempPath, returning the first non-empty value from %TMP%, %TEMP%, %USERPROFILE%, or the Windows directory.

See this documentation for more details.

If the image is large or the temporary directory has insufficient space, the scan will fail. You can configure the directory path to redirect Trivy to a directory with adequate storage. On Unix systems, you can set the $TMPDIR environment variable.

$ TMPDIR=/my/custom/path trivy image ...

When scanning images from a container registry, Trivy processes each layer by streaming, loading only the necessary files for the scan into memory and discarding unnecessary files. If a layer contains large files that are necessary for the scan (such as JAR files or binary files), Trivy saves them to a temporary directory (e.g. $TMPDIR) on local storage to avoid increased memory consumption. Although these files are deleted after the scan is complete, they can temporarily increase disk consumption and potentially exhaust storage. In such cases, there are currently three workarounds:

  1. Use a temporary directory with sufficient capacity

    This is the same as explained above.

  2. Specify a small value for --parallel

    By default, multiple layers are processed in parallel. If each layer contains large files, disk space may be consumed rapidly. By specifying a small value such as --parallel 1, parallelism is reduced, which can mitigate the issue.

  3. Specify --skip-files or --skip-dirs

    If the container image contains large files that do not need to be scanned, you can skip their processing by specifying --skip-files or --skip-dirs. For more details, please refer to this documentation.

DB

Old DB schema

Error

--skip-update cannot be specified with the old DB schema.

Trivy v0.23.0 or later requires Trivy DB v2. Please update your local database or follow the instruction of air-gapped environment.

Error downloading vulnerability DB

Error

FATAL failed to download vulnerability DB

If trivy is running behind corporate firewall, you have to add the following urls to your allowlist.

  • ghcr.io
  • pkg-containers.githubusercontent.com

Denied

Error

GET https://ghcr.io/token?scope=repository%3Aaquasecurity%2Ftrivy-db%3Apull&service=ghcr.io: DENIED: denied

Your local GHCR (GitHub Container Registry) token might be expired. Please remove the token and try downloading the DB again.

docker logout ghcr.io

Homebrew

Scope error

Error

Error: Your macOS keychain GitHub credentials do not have sufficient scope!

$ brew tap aquasecurity/trivy
Error: Your macOS keychain GitHub credentials do not have sufficient scope!
Scopes they need: none
Scopes they have:
Create a personal access token:
https://github.com/settings/tokens/new?scopes=gist,public_repo&description=Homebrew
echo 'export HOMEBREW_GITHUB_API_TOKEN=your_token_here' >> ~/.zshrc

Try:

$ printf "protocol=https\nhost=github.com\n" | git credential-osxkeychain erase

Already installed

Error

Error: aquasecurity/trivy/trivy 64 already installed

$ brew upgrade
...
Error: aquasecurity/trivy/trivy 64 already installed

Try:

$ brew unlink trivy && brew uninstall trivy
($ rm -rf /usr/local/Cellar/trivy/64)
$ brew install aquasecurity/trivy/trivy

Others

Unknown error

Try again with --reset option:

$ trivy image --reset